Part Number Hot Search : 
0STRR ADL53 EL7532 BP103BF3 BRF106 CY14B C3021 PLVA2650
Product Description
Full Text Search
 

To Download CPC1965Y Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 CPC1965Y
AC Solid State Relay
AC Operating Voltage Load Current On-State Voltage Drop
CPC1965Y 260 1.0 1.6
Units VRMS A VRMS (At IL = 1.0A)
Features * Load Current up to 1A * Blocking Voltage to 600V * 5mA Sensitivity * Zero-Cross Detection * DC Control, AC Output * Optically Isolated * TTL and CMOS Compatible * Low EMI and RFI Generation * High Noise Immunity * VDE compatible * Machine Insertable, Wave Solderable
Description The CPC1965Y is a AC Solid State Switch using patented waveguide coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The CPC1965Y switches are robust enough to provide a blocking voltage of up to 600V. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750V of isolation and noise immunity between control and load circuits. As a result the CPC1965Y is well suited for industrial environments where electromagnetic interference would disrupt the operation of electromechanical relays.
Approvals * UL recognized file #: Pending * CSA certified file #: Pending
Applications * Programmable Control * Process Control * Power Control Panels * Remote Switching * Gas Pump Electronics * Contractors * Large Relays * Solenoids * Motors * Heaters
Ordering Information Part # CPC1965Y Description 8 Pin SIP (25/Tube)
Pin Configuration CPC1965Y Pinout
ZC
1 2 - LED + LED
6 8 AC Load AC Load
DS-CPC1965Y-R1
www.clare.com
1
CPC1965Y
Absolute Maximum Ratings (@ 25 C)
Parameter Min Typ Max Units 1501 mW 100 mA 1 A 5 V 16002 mW VRMS +85 C +125 C Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Package Dissipation PD Isolation Voltage Input to Output 3750 Operational Temperature -40 Storage Temperature -40 Soldering Temperature (10 Seconds Max.) DIP Package 1 2
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.
-
+260
C
Derate Linearly 1.33 mW/C Derate Linearly 16.6 mW/C
Electrical Characteristics
Parameter Output Characteristics @ 25C Operating Voltage Range Peak Blocking Voltage Load Current (Continuous) Non-repetitive Single Cycle Surge Current Off State Leakage Current On-State Voltage Drop Critical Rate of Rise3 Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage Operating Frequency1 Load Power Factor for Guaranteed Turn-On2 Capacitance Input to Output Input Characteristics @ 25C Input Control Current For Normal Environment For High Noise Environment Input Voltage Drop Input Drop-out Voltage Reverse Input Current
1 2 3
Conditions VT VL=120-260VAC VDRM IL=1.0A
Symbol
Min 20 0.005 500 20 0.25 -
Typ 2 3
Max 260 600 1.0 10 1 1.6 0.5 0.5 10 1 400 -
Units VRMS V IARMS A mA VRMS V/S Cycles Cycles V V Hz pF
VDRM IL ITSM ILEAK dv/dt
IF=5 mA IF=5 mA 1st half cycle Sub. half cycle -
TON TOFF
PF -
IF=5mA VR=5V
IF IF VF IR
5 10 0.9 0.8 -
1.2 -
50 100 1.4 10
mA mA V V uA
Zero cross 1st 1/2 cycle @ <100Hz Snubber circuits may be required at low power factors. Tested in accordance with EIA/NARM Standard RS-443.
2
www.clare.com
Rev. 1
CPC1965Y
PERFORMANCE DATA*
CPC1965Y Typical LED Forward Voltage Drop (Ambient Temperature = 25 C) IF = 5mADC
o
CPC1965Y Typical On-State Output Forward Voltage Distribution (Ambient Temperature = 25 C)
o
35 30
35 30 25 20 15 10 5 0
25
Device Count (N)
CPC1965Y o Typical Blocking Voltage Distribution (Ambient Temperature = 25C)
Device Count (N)
25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25
Device Count (N)
20 15 10 5 0 645 650 655 660 665 670 675
1.05
1.06
1.07
1.08
1.09
1.10
1.11
LED Forward Voltage Drop (V)
Output Forward Voltage
Blocking Voltage
CPC1965Y Typical IF for Switch Operation (Ambient Temperature = 25C)
o
CPC1965Y Typical Maximum Load Current vs. Temperature
25
Device Count (N)
Load Current (A)
20
15
10
5
0 0.21 0.22 0.23 0.24 0.25 0.26 0.27
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
IF =5mA
-40 -20
0
LED Current (mA)
Temperature (oC)
20
40 60
80 100 120
0.278 0.276 0.274 0.272 0.270 0.268 0.266 0.264
CPC1965Y Typical Leakage vs. Temperature @ Maximum Rated Load Voltage
Leakage (mA)
25
40
55
70
85
LED Forward Current (mA)
Blocking Voltage (V)
$& $%
V-on (V)
$$ $# $" $!
#
"
##
%
&#
1.100 1.080 1.060 1.040 1.020 1.000 0.980 0.960
LED Forward Voltage Drop (V)
$'
CPC1965Y Typical Blocking Voltage vs. Temperature
CPC1965Y Typical Output VF vs. Temperature
CPC1965Y Typical LED Forward Voltage Drop vs. Temperature
1.8 1.6
1.4
1.2
50mA 30mA 20mA 10mA 5mA
1.0
25
40
55
70
85
0.8 -40 -20 0 20 40 60 80 100 120
Temperature (C)
Temperature (C)
Temperature (oC)
Peak Surge Current (A)
CPC1965Y Maximum Surge Current (non-repetitive) (TJ=50oC max)
& $ "
$
#
Pulse Duration (mS)
Led Current (mA)
0.400 0.350 0.300 0.250 0.200 0.150 0.100 0.050 0.000
CPC1965Y Typical IF for Switch Operation Over Temperature
25
40
55
70
85
Temperature (C)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
Mechanical Dimensions
8 Pin SIP
3.302 .051 (.130 .002)
19.202 .381 (.756 .015) 8.99 (.354) 3.30 (.130) 5.944 TYP. (.234) 10.160 (.400) 5.080 (.200) .508 TYP. (.020) Dimensions mm (inches)
6.350 TYP. (.250)
Rev. 1
www.clare.com
3
Worldwide Sales Offices
CLARE LOCATIONS
Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628
EUROPE
European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797
ASIA PACIFIC
Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
SALES OFFICES AMERICAS
Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-CPC1965Y-R1 (c)Copyright 2001, Clare, Inc. All rights reserved. Printed in USA. 1/12/01


▲Up To Search▲   

 
Price & Availability of CPC1965Y

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X